ProTIG 325PW AC/DC [source, cooler, driving set]
Code: NVWWDPTIG325PWAProduct detailed description
ProTIG 325PW AC/DC - MODERN AND EFFICIENT TIG AC/DC WITH PULSE
INDUSTRIAL ProTIG 325PW AC/DC is a technologically advanced inverter welder for professional use. It allows welding using TIG AC/DC and MMA AC/DC methods, reaching a maximum current of 320A, powered by 400V three-phase network. Includes integrated liquid cooler on trolley. Features 3 AC waveforms, 10 memory channels, and multiple control options including wireless remote.
| Input | ~3× 400V ± 10% 50 / 60 Hz |
|---|---|
| TIG welding current | [AC] 10 – 320A / [DC] 5 – 320A |
| TIG duty cycle | 60% |
| Gas pre flow | 0.1 – 2s |
| Gas post flow | 0 – 10s |
| Up slope | 0 – 10s |
| Down slope | 0 – 10s |
| TIG Pulse | yes |
| Pulse Amps | 5 – 320A |
| Pulse Width | 5 – 95% |
| Pulse frequency | 0.5 – 999Hz |
| AC frequency | 50 – 250Hz |
| AC wave forms | square, sinusoidal, triangular |
| AC balance | 10 - 99% |
| 2T/4T Control | yes |
| SPOT welding | yes |
| Arc ignition | LIFT / HF |
| Control options | UP&DOWN, wired foot control, potentiometer, wireless remote |
| Water cooler | yes |
| MMA welding current | 10 – 320A |
| Arc Force | yes |
| Hot Start | yes |
| No-load voltage | 10.3V |
| Current consumption | AC: TIG 17.4 / MMA 23.2; DC: TIG 18.6 / MMA 24.6 |
| Power factor (cosφ) | 0.7 |
| Efficiency η | 85% |
| Insulation class | H |
| Protection class | IP23 |
Product rating
Be the first who will post an article to this item!