Adhesive lubricant HHS® 200 PLUS
Code: WRT0893106204Product detailed description
Effective lubrication
- Eliminates creaking and squeaking noises
- Excellent pressure resistance and outstanding lubricating effect
- Economical due to the minimal quantity required for lubrication while simultaneously lubricating effectively
Outstanding protection and durability
- Ideally suited for outdoor lubrication due to its resistance to rinsing off
- First-class sealing against weather conditions
- High pressure resistance under extreme loads for reliable protection
- Reduction in frequency of re-lubrication needed due to wear resistance of the lubricated surfaces
- Offers long-lasting corrosion protection
- Excellent sealing behaviour against moisture and dirt
Maximum compatibility
- Boron nitride allows a wide temperature range for consistent lubrication
- In the event of oil attenuation above 180 °C, boron nitride takes over lubrication up to 1,000 °C (dry lubrication)
- Free of microplastics
- Can be used in the food sector due to NSF certification
- NSF-registered in accordance with NSF H1: The product may come into contact with foodstuffs for technical reasons
- If used in areas in which food is processed or stored, only the minimum quantity technically required may be used. If the product is to be used as an anti-corrosive film, it must be completely removed before the device in question is used again.
For professional use in lubrication and protection of mechanical components in a wide range of areas such as the automotive industry, industrial applications, agriculture, construction and general maintenance.
- Shake can well before use
- Thoroughly clean the points to be lubricated before application
- Then spray evenly onto the cleaned surface
|
Chemical basis |
Synthesis of fat and additives in hydrocarbon solvents |
|
Oil basis |
Fat synthesis |
|
Colour |
Beige |
|
Smell/fragrance |
Characteristic |
|
Density |
0.795 g/ml |
|
Min. temperature conditions |
-40 °C |
|
Max. temperature conditions |
180 °C |
|
Max. temperature resistance |
1000 °C |
|
Min. flashing point of active ingredient |
200 °C |
|
Min. flashing point |
200 °C |
|
Kinematic oil basis viscosity |
1000 cSt |
|
Conditions for viscosity of oil basis |
at 40°C |
|
Silicone-free |
Yes |
|
Acid-free |
Yes |
|
Resin-free |
Yes |
|
Resistance against |
Water, Salt water, Weak lyes, Weak acids |
|
Material compatibility |
Steel, Non-ferrous heavy metals, Stainless steel, EPDM, FKM, NBR |
|
Contents |
400 ml |
|
Weight of content |
248 g |
|
Shelf life from production |
24 Month |
|
Sustainability |
Pollutants / Emissions |
Be the first who will post an article to this item!